NSN: 6685-15-020-8872

Performing calibration check for comparison on pressure gauges with various scales and classes. For use with:

• Hydraulic press P/N TMC600 (supplied in the kit)
• Data Acquisition System P/N MCD-10290-9-1 (pre installed on Notebook in the kit): allows data elaboration directly acquired by the digital pressure gauges, stores the data and prepare the instrument calibration report

Main Features

The P/N MCD-10290-9 pressure gauge check digital equipment developed for pressure gauge calibration check is composed by two different sections:

• High pressure section allowing to check gauges up to 700bar (10000 PSI) having an accuracy of 0.1% f.s (resolution of 0.1bar)
• Low pressure section allowing to test gauges up to 20bar (290 PSI) having an accuracy of 0.1% f.s (resolution 0.01bar)

The system allow to choose different units of measure like PSI, bar, Mpa. The digital instruments used in the pressure gauge calibration check digital equipment are certified as referment instruments by an Italian certified calibration laboratory appointed by  ACCREDIA” (Italian Accreditation Organisation) and are supplied with relevant certificates.

The pressure gauge check digital equipment have a 0.1% accuracy, as requested by the EN 837-1, to test the pressure gauge with a class 0.4% or greater (typical instrument installed on hydraulic test benches or on production process line).

Controls

The testing line circuit is provided with:

• Minimess quick disconnect
• RS232 plug on the instruments for data exchange through a RS232-USB cable to PC.
• Digital pressure gauges completely self-sufficient for field operation (2 AAA batteries grant 1 year of use)

On the digital pressure gauges are present the following controls in order to operate locally:

• ON/OFF pushbutton
• ZERO setting and scale setting
• PEAK (max value recorded)

Option

The kit can also be provided with single digital pressure gauge with different pressure ranges.

Accessories

Standard: RS232-USB cable; 2 minimess hoses provided with 2 M16X2 swivel nuts; notebook complete of software, hydraulic press P/N TMC600.